首页 > 论文 > Photonics Research > 8卷 > 7期(pp:1-15)

Research progress in large-area perovskite solar cells

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

Abstract

The record power conversion efficiency of small-area perovskite solar cells has impressively exceeded 25%. For commercial application, a large-area device is the necessary next step. Recently, significant progress has been achieved in fabricating efficient large-area perovskite solar cells. In this review, we will summarize recent achievements in large-area perovskite solar cells including the deposition methods as well as growth control of the large-area, high-quality perovskite layer and also the charge transport layer. Finally, we will give our insight into large-area perovskite solar cells.

补充资料

DOI:

所属栏目:Research Articles

基金项目:China National Funds for Distinguished Young Scientists10.13039/501100005153;

收稿日期:2020-03-19

录用日期:2020-04-21

网络出版日期:2020-04-21

作者单位    点击查看

Yang Zhao:Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China;College of Materials Science and Opto-electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
Fei Ma:Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China;College of Materials Science and Opto-electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
Feng Gao:Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China;College of Materials Science and Opto-electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
Zhigang Yin:Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China;College of Materials Science and Opto-electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
Xingwang Zhang:Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China;College of Materials Science and Opto-electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China
Jingbi You:Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China;College of Materials Science and Opto-electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China

联系人作者:Jingbi You(jyou@semi.ac.cn)

备注:China National Funds for Distinguished Young Scientists10.13039/501100005153;

【1】K. Kojima, Y. Teshima, T. Shirai and T. Miyasaka. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050-6051(2009).

【2】H. Kim, C. Lee, J. H. Im, K. Lee, T. Moehl, A. Marchioro, S. Moon, R. Humphry-Baker, J. Yum, J. Moser, M. Gratzel and N. Park. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, (2012).

【3】M。 M。 Lee, J。 Teuscher, T。 Miyasaka, T。 N。 Murakami and H。 J。 Snaith。 Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites。 Science。 338, 643-647(2012)。

【4】W. Yang, J. Noh, N. Jeon, Y. Kim, S. Ryu, J. Seo and S. Seok. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange. Science. 348, 1234-1237(2015).

【5】D. Bi, C. Yi, J. Luo, J. D. Decoppet, F. Zhang, S. Zakeeruddin, X. Li, A. Hagfeldt and M. Gratzel. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%. Nat. Energy. 1, (2016).

【6】W. S. Yang, B.-W. Park, E. H. Jung, N. J. Jeon, Y. C. Kim, D. Uk Lee, S. S. Shin, J. Seo, E. K. Kim, J. H. Noh and S. Il Seok. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science. 356, 1376-1379(2017).

【7】N。 Jeon, H。 Na, E。 Jung, T。-Y。 Yang, Y。 Lee, G。 Kim, H。-W。 Shin, S。 Seok, J。 Lee and J。 Seo。 A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells。 Nat。 Energy。 3, 682-689(2018)。

【8】Q. Jiang, Y. Zhao, X. Zhang, X. Yang, Y. Chen, Z. Chu, Q. Ye, X. Li, Z. Yin and J. You. Surface passivation of perovskite film for efficient solar cells. Nat. Photonics. 13, 460-466(2019).

【9】。 https://www。nrel。gov/pv/assets/pdfs/best-research-cell-efficiencies。20200218。pdf。 (0)。

【10】Q. Ye, Y. Zhao, S. Mu, P. Gao, X. Zhang and J. You. Stabilizing the black phase of cesium lead halide inorganic perovskite for efficient solar cells. Sci. China Chem. 62, 810-821(2019).

【11】F. Gao, Y. Zhao, X. Zhang and J. You. Recent progresses on defect passivation toward efficient perovskite solar cells. Adv. Energy Mater. 10, (2019).

【12】J.-W. Lee, D.-K. Lee, D.-N. Jeong and N.-G. Park. Control of crystal growth toward scalable fabrication of perovskite solar cells. Adv. Funct. Mater. 29, (2018).

【13】D。 H。 Kim, J。 B。 Whitaker, Z。 Li, M。 F。 A。 M。 van Hest and K。 Zhu。 Outlook and challenges of perovskite solar cells toward terawatt-scale photovoltaic module technology。 Joule。 2, 1437-1451(2018)。

【14】N。-G。 ParkN。-G。 Park。 Research direction toward scalable, stable, and high efficiency perovskite solar cells。 Adv。 Energy Mater。 10, (2019)。

【15】B. Cao, L. Yang, S. Jiang, H. Lin, N. Wang and X. Li. Flexible quintuple cation perovskite solar cells with high efficiency. J. Mater. Chem. A. 7, 4960-4970(2019).

【16】T. Bu, J. Li, F. Zheng, W. Chen, X. Wen, Z. Ku, Y. Peng, J. Zhong, Y.-B. Cheng and F. Huang. Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module. Nat. Commun. 9, (2018).

【17】W. Chen, Y. Wu, Y. Yue, J. Liu, W. Zhang, X. Yang, H. Chen, E. Bi, I. Ashraful, M. Gr?tzel and L. Han. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers. Science. 350, 944-948(2015).

【18】H. Tan, A. Jain, O. Voznyy, X. Lan, F. P. G. de Arquer, J. Z. Fan, R. Q. Bermudez, M. Yuan, B. Zhang, Y. Zhao, F. Fan, P. Li, L. N. Quan, Y. Zhao, Z.-H. Lu, Z. Yang, S. Hoogland and E. H. Sargent. Efficient and stable solution-processed planar perovskite solar cells via contact passivation. Science. 355, 722-726(2017).

【19】Q。 Jiang, Z。 Chu, P。 Wang, X。 Yang, H。 Liu, Y。 Wang, Z。 Yin, J。 Wu, X。 Zhang and J。 You。 Planar-structure perovskite solar cells with efficiency beyond 21%。 Adv。 Mater。 29, (2017)。

【20】Y。 Deng, E。 Peng, Y。 Shao, Z。 Xiao, Q。 Dong and J。 Huang。 Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers。 Energy Environ。 Sci。 8, 1544-1550(2015)。

【21】Y。 Deng, X。 Zheng, Y。 Bai, Q。 Wang, J。 Zhao and J。 Huang。 Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules。 Nat。 Energy。 3, 560-566(2018)。

【22】H. Chen, F. Ye, W. Tang, J. He, M. Yin, Y. Wang, F. Xie, E. Bi, X. Yang, M. Gr?tzel and L. Han. A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules. Nature. 550, 92-95(2017).

【23】. http://www.microquanta.com/. (0).

【24】M. A. Green, E. D. Dunlop, J. H. Ebinger, M. Yoshita, N. Kopidakis and A. W. Y. Ho-Baillie. Solar cell efficiency tables (version 55). Prog. Photovolt. Res. Appl. 28, 3-15(2020).

【25】H。 S。 Jung, G。 S。 Han, N。-G。 Park and M。 J。 Ko。 Flexible perovskite solar cells。 Joule。 3, 1850-1880(2019)。

【26】Y. Chen, L. Zhang, Y. Zhang, H. Gao and H. Yan. Large-area perovskite solar cells – a review of recent progress and issues. RSC Adv. 8, 10489-10508(2018).

【27】N. J. Jeon, J. H. Noh, W. S. Yang, Y. C. Kim, S. Ryu, J. Seo and S. Il Seok. Compositional engineering of perovskite materials for high-performance solar cells. Nature. 517, 476-480(2015).

【28】Z. Yang, C.-C. Chueh, F. Zuo, J. H. Kim, P.-W. Liang and A. K.-Y. Jen. High-performance fully printable perovskite solar cells via blade-coating technique under the ambient condition. Adv. Energy Mater. 5, (2015).

【29】Y. Deng, C. H. V. Brackle, X. Dai, J. Zhao, B. Chen and J. Huang. Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films. Sci. Adv. 5, (2019).

【30】J. B. Whitaker, D. H. Kim, B. W. Larson, F. Zhang, J. J. Berry, M. F. A. M. van Hest and K. Zhu. Scalable slot-die coating of high performance perovskite solar cells. Sustain. Energy Fuels. 2, 2442-2449(2018).

【31】D. Vak, K. Hwang, A. Faulks, Y.-S. Jung, N. Clark, D.-Y. Kim, G. J. Wilson and S. E. Watkins. 3D printer based slot-die coater as a lab-to-fab translation tool for solution-processed solar cells. Adv. Energy Mater. 5, (2014).

【32】K. Hwang, Y.-S. Jung, Y.-J. Heo, F. H. Scholes, S. E. Watkins, J. Subbiah, D. J. Jones, D.-Y. Kim and D. Vak. Toward large scale roll-to-roll production of fully printed perovskite solar cells. Adv. Mater. 27, 1241-1247(2015).

【33】C. Zuo, D. Vak, D. Angmo, L. Ding and M. Gao. One-step roll-to-roll air processed high efficiency perovskite solar cells. Nano Energy. 46, 185-192(2018).

【34】F。 D。 Giacomo, S。 Shanmugam, H。 Fledderus, B。 J。 Bruijnaers, W。 J。 Verhees, M。 S。 Dorenkamper, S。 C。 Veenstra, W。 Qiu, R。 Gehlhaar and T。 Merckx。 Up-scalable sheet-to-sheet production of high efficiency perovskite module and solar cells on 6-in。 substrate using slot die coating。 Sol。 Energy Mater。 Sol。 Cells。 181, 53-59(2018)。

【35】J。 G。 Tait, S。 Manghooli, W。 Qiu, L。 Rakocevic, L。 Kootstra, M。 Jaysankar, C。 A。 Massede la Huerta, U。 W。 Paetzold, R。 Gehlhaar, D。 Cheyns, P。 Heremans and J。 Poortmans。 Rapid composition screening for perovskite photovoltaics via concurrently pumped ultrasonic spray coating。 J。 Mater。 Chem。 A。 4, 3792-3797(2016)。

【36】A。 T。 Barrows, A。 J。 Pearson, C。 K。 Kwak, A。 D。 F。 Dunbar, A。 R。 Buckley and D。 G。 Lidzey。 Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition。 Energy Environ。 Sci。 7, 2944-2950(2014)。

【37】J. H. Heo, M. H. Lee, M. H. Jang and S. H. Im. Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating. J. Mater. Chem. A. 4, 17636-17642(2016).

【38】M. Park, W. Cho, G. Lee, S. C. Hong, M.-C. Kim, J. Yoon, N. Ahn and M. Choi. Highly reproducible large-area perovskite solar cell fabrication via continuous megasonic spray coating of CH3NH3PbI3. Small. 15, (2018).

【39】O. A. Basaran, H. Gao and P. P. Bhat. Nonstandard inkjets. Annu. Rev. Fluid Mech. 45, 85-113(2013).

【40】S。 K。 Karunakaran, G。 M。 Arumugam, W。 Yang, S。 Ge, S。 N。 Khan, X。 Lin and G。 Yang。 Recent progress in inkjet-printed solar cells。 J。 Mater。 Chem。 A。 7, 13873-13902(2019)。

【41】A. Priyadarshi, L. J. Haur, P. Murray, D. Fu, S. Kulkarni, G. Xing, T. C. Sum, N. Mathews and S. G. Mhaisalkar. A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability. Energy Environ. Sci. 9, 3687-3692(2016).

【42】C. Liang, P. Li, H. Gu, Y. Zhang, F. Li, Y. Song, G. Shao, N. Mathews and G. Xing. One-step inkjet printed perovskite in air for efficient light harvesting. Sol. RRL. 2, (2018).

【43】P。 Li, C。 Liang, B。 Bao, Y。 Li, X。 Hu, Y。 Wang, Y。 Zhang, F。 Li, G。 Shao and Y。 Song。 Inkjet manipulated homogeneous large size perovskite grains for efficient and large-area perovskite solar cells。 Nano Energy。 46, 203-211(2018)。

【44】J。-E。 Kim, S。-S。 Kim, C。 Zuo, M。 Gao, D。 Vak and D。-Y。 Kim。 Humidity-tolerant roll-to-roll fabrication of perovskite solar cells via polymer-additive- assisted hot slot die deposition。 Adv。 Funct。 Mater。 29, (2019)。

【45】Y. Y. Kim, T.-Y. Yang, R. Suhonen, M. V?lim?ki, T. Maaninen, A. Kemppainen, N. J. Jeon and J. Seo. Gravure-printed flexible perovskite solar cells: toward roll-to-roll manufacturing. Adv. Sci. 6, (2019).

【46】X. Li, D. Bi, C. Yi, J.-D. Décoppet, J. Luo, S. M. Zakeeruddin, A. Hagfeldt and M. Gr?tzel. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells. Science. 353, 58-62(2016).

【47】Y。 Rong, Y。 Hu, A。 Mei, H。 Tan, M。 I。 Saidaminov, S。 Il Seok, M。 D。 McGehee, E。 H。 Sargent and H。 Han。 Challenges for commercializing perovskite solar cells。 Science。 361, (2018)。

【48】Y. Zhao, Q. Ye, Z. Chu, F. Gao, X. Zhang and J. You. Recent progress in high-efficiency planar-structure perovskite solar cells. Energy Environ. Mater. 2, 93-106(2019).

【49】Y. Wu, A. Islam, X. Yang, C. Qin, J. Liu, K. Zhang, W. Peng and L. Han. Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition. Energy Environ. Sci. 7, 2934-2938(2014).

【50】N。 J。 Jeon, J。 H。 Noh, Y。 C。 Kim, W。 S。 Yang, S。 Ryu and S。 I。 Seok。 Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells。 Nat。 Mater。 13, 897-903(2014)。

【51】H.-C. Liao, P. Guo, C.-P. Hsu, M. Lin, B. Wang, L. Zeng, W. Huang, C. M. M. Soe, W.-F. Su, M. J. Bedzyk, M. R. Wasielewski, A. Facchetti, R. P. H. Chang, M. G. Kanatzidis and T. J. Marks. Enhanced efficiency of hot-cast large-area planar perovskite solar cells/modules having controlled chloride incorporation. Adv. Energy Mater. 7, (2017).

【52】M. Yang, Z. Li, M. O. Reese, O. G. Reid, D. H. Kim, S. Siol, T. R. Klein, Y. Yan, J. J. Berry, M. F. A. M. van Hest and K. Zhu. Perovskite ink with wide processing window for scalable high-efficiency solar cells. Nat. Energy. 2, (2017).

【53】Z。 Liu, L。 Qiu, E。 J。 J。 Perez, Z。 Hawash, T。 Kim, Y。 Jiang, Z。 Wu, S。 R。 Raga, L。 K。 Ono, S。 F。 Liu and Y。 Qi。 Gas-solid reaction based over one-micrometer thick stable perovskite films for efficient solar cells and modules。 Nat。 Commun。 9, (2018)。

【54】M. Yang, Y. Zhou, Y. Zeng, C.-S. Jiang, N. P. Padture and K. Zhu. Square-centimeter solution-processed planar CH3NH3PbI3 perovskite solar cells with efficiency exceeding 15%. Adv. Mater. 27, 6363-6370(2015).

【55】W. Qiu, T. Merckx, M. Jaysankar, C. Masse de la Huerta, L. Rakocevic, W. Zhang, U. W. Paetzold, R. Gehlhaar, L. Froyen, J. Poortmans, D. Cheyns, H. J. Snaith and P. Heremans. Pinhole-free perovskite films for efficient solar modules. Energy Environ. Sci. 9, 484-489(2016).

【56】T. Bu, X. Liu, Y. Zhou, J. Yi, X. Huang, L. Luo, J. Xiao, Z. Ku, Y. Peng, F. Huang, Y.-B. Cheng and J. Zhong. Novel quadruple-cation absorber for universal hysteresis elimination for high efficiency and stable perovskite solar cells. Energy Environ. Sci. 10, 2509-2515(2017).

【57】L. Qiu, S. He, Y. Jiang, D.-Y. Son, L. K. Ono, Z. Liu, T. Kim, T. Bouloumis, S. Kazaoui and Y. Qi. Hybrid chemical vapor deposition enables scalable and stable Cs-FA mixed cation perovskite solar modules with a designated area of 91.8 cm2 approaching 10% efficiency. J. Mater. Chem. A. 7, 6920-6929(2019).

【58】P.-W. Liang, C.-Y. Liao, C.-C. Chueh, F. Zuo, S. T. Williams, X.-K. Xin, J. Lin and A. K.-Y. Jen. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells. Adv. Mater. 26, 3748-3754(2014).

【59】G. Fu, L. Hou, Y. Wang, X. Liu, J. Wang, H. Li, Y. Cui, D. Liu, X. Li and S. Yang. Efficiency enhancement in planar CH3NH3PbI3–xClx perovskite solar cells by processing with bidentate halogenated additives. Sol. Energy Mater. Sol. Cells. 165, 36-44(2017).

【60】C。 Liang, D。 Zhao, Y。 Li, X。 Li, S。 Peng, G。 Shao and G。 Xing。 Ruddlesden–Popper perovskite for stable solar cells。 Energy Environ。 Mater。 1, 221-231(2018)。

【61】C. Liang, D. Zhao, P. Li, B. Wu, H. Gu, J. Zhang, T. W. Goh, S. Chen, Y. Chen, Z. Sha, G. Shao, T. C. Sumb and G. Xing. Simultaneously boost diffusion length and stability of perovskite for high performance solar cells. Nano Energy. 59, 721-729(2019).

【62】C。 Liang, K。 M。 Muhammed Salim, P。 Li, Z。 Wang, T。 M。 Koh, H。 Gu, B。 Wu, J。 Xia, Z。 Zhang, K。 Wang, T。 Liu, Q。 Wei, S。 Wang, Y。 Tang, G。 Shao, Y。 Song, N。 Mathews and G。 Xing。 Controlling films structure by regulating 2D Ruddlesden-Popper perovskite formation enthalpy for efficient and stable tri-cation perovskite solar cells。 J。 Mater。 Chem。 A。 8, 5874-5881(2020)。

【63】P. Li, Y. Zhang, C. Liang, G. Xing, X. Liu, F. Li, X. Liu, X. Hu, G. Shao and Y. Song. Phase pure 2D perovskite for high-performance 2D-3D heterostructured perovskite solar cells. Adv. Mater. 30, (2018).

【64】J. Feng, Z. Yang, D. Yang, X. Ren, X. Zhu, Z. Jin, W. Zi, Q. Wei and S. F. Liu. E-beam evaporated Nb2O5 as an effective electron transport layer for large flexible perovskite solar cells. Nano Energy. 36, 1-8(2017).

【65】C。 Liang, Z。 Wu, P。 Li, J。 Fan, Y。 Zhang and G。 Shao。 Making high-quality CTLs is as important as making high-quality perovskite films to achieve efficient and stable PSCs。 Appl。 Surf。 Sci。 391, 337-341(2017)。

【66】J. Sun, J. Lu, B. Li, L. Jiang, A. S. R. Chesman, A. D. Scully, T. R. Gengenbach, Y.-B. Cheng and J. J. Jasieniak. Inverted perovskite solar cells with high fill-factors featuring chemical bath deposited mesoporous NiO hole transporting layers. Nano Energy. 49, 163-171(2018).

【67】X. Ren, L. Xie, W. B. Kim, D. G. Lee, H. S. Jung and S. F. Liu. Chemical bath deposition of co-doped TiO2 electron transport layer for hysteresis-suppressed high-efficiency planar perovskite solar cells. Sol. RRL. 3, (2019).

【68】A. Mei, X. Li, L. Liu, Z. Ku, T. Liu, Y. Rong, M. Xu, M. Hu, J. Chen, Y. Yang, M. Gr?tzel and H. Han. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability. Science. 345, 295-298(2014).

【69】Y. Hu, S. Si, A. Mei, Y. Rong, H. Liu, X. Li and H. Han. Stable large-area (10 × 10 cm2) printable mesoscopic perovskite module exceeding 10% efficiency. Sol. RRL. 1, (2017).

【70】B. Dou, J. B. Whitaker, K. Bruening, D. T. Moore, L. M. Wheeler, J. Ryter, N. J. Breslin, J. J. Berry, S. M. Garner and F. Barnes. Roll-to-roll printing of perovskite solar cells. ACS Energy Lett. 3, 2558-2565(2018).

【71】L. Qiu, Z. Liu, L. K. Ono, Y. Jiang, D.-Y. Son, Z. Hawash, S. He and Y. Qi. Scalable fabrication of stable high efficiency perovskite solar cells and modules utilizing room temperature sputtered SnO2 electron transport layer. Adv. Funct. Mater. 29, (2019).

【72】G。 Li, Y。 Jiang, S。 Deng, A。 Tam, P。 Xu, M。 Wong and H。-S。 Kwok。 Overcoming the limitations of sputtered nickel oxide for high-efficiency and large-area perovskite solar cells。 Adv。 Sci。 4, (2017)。

【73】W. Chen, Y. Wu, J. Fan, A. B. Djuri?i?, F. Liu, H. W. Tam, A. Ng, C. Surya, W. K. Chan, D. Wang and Z.-B. He. Understanding the doping effect on NiO: toward high-performance inverted perovskite solar cells. Adv. Energy Mater. 8, (2018).

【74】T。 Qin, W。 Huang, J。-E。 Kim, D。 Vak, C。 Forsyth, C。 R。 McNeill and Y。-B。 Cheng。 Amorphous hole-transporting layer in slot-die coated perovskite solar cells。 Nano Energy。 31, 210-217(2017)。

【75】E. H. Jung, N. J. Jeon, E. Y. Park, C. S. Moon, T. J. Shin, T.-Y. Yang, J. H. Noh and J. Seo. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene). Nature. 567, 511-515(2019).

【76】Y. Wang, T. Wu, J. Barbaud, W. Kong, D. Cui, H. Chen, X. Yang and L. Han. Stabilizing heterostructures of soft perovskite semiconductors. Science. 365, 687-691(2019).

【77】G。 Grancini, C。 Roldán-Carmona, I。 Zimmermann, E。 Mosconi, X。 Lee, D。 Martineau, S。 Narbey, F。 Oswald, F。 De Angelis, M。 Graetzel and M。 K。 Nazeeruddin。 One-year stable perovskite solar cells by 2D/3D interface engineering。 Nat。 Commun。 8, (2017)。

引用该论文

Yang Zhao, Fei Ma, Feng Gao, Zhigang Yin, Xingwang Zhang, and Jingbi You, "Research progress in large-area perovskite solar cells," Photonics Research 8(7), A1 (2020)

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF

威尼斯人彩票计划群 长江彩票计划群 吉林快3开奖 山东11选5开奖 福星彩票计划群 吉林快3代理 山东11选5走势 上海11选5计划 上海11选5计划 极速赛车直播网站